Designed for Salad Prep areas and areas of small volume and light waste.
| Model A 10 Series Product Detail |Model A 7 Series Product Detail |Model A 5 Series Product Detail |
| Model C 5 Series Product Detail |Model C 3 Series Product Detail |Model C 2 Series Product Detail |
| Model C 12 Series Product Detail | Model D 2 Series Product Detail | Model D 12 Series Product Detail |
| Model D 1 Series Product Detail | Model D 34 Series Product Detail |
| Home Page |
SPECIFICATIONS:
Disposer to be a Master Disposer Model D1 1HP 6" Diameter Rotor/Turntable with 2 integral impact breakers constructed of hardened ductile steel alloy for long life use. Matching Sizing Ring with 20 grind teeth constructed of hardened ductile steel alloy. 4 3/4" throat opening. Low body chamber with force feed directional deflectors. Bolt on grind chamber for ease of removing disposer during servicing. Cast in discharge flange. Water inlet in waste chamber wall. Bolt on "Continuous Duty" motor for easy removal. Exclusive shaft extension with 1/2" wrench flats to externally de-jam foreign matter without special tools. Heavy cast alloy construction providing an extra long life disposer.
MOTOR DATA
1 HP 1 Phase 115/230 Volt 13.2/6.6 Amp
1 HP 3 Phase 208-230/460 Volt 4.2/21. Amp
Continuous Duty-Dual
Voltage Dual
Direction and overload protection in
motor 1750 RPM-60 CY
Motors. Full
service factor-in accordance
with NEMA & NEC
electrical codes.
Bearings permanently
lubricated.